SFP+ Transceivers fiber and operate at nominal wavelengths

SFP + optical transceivers fully supports IEEE 802.3ae 10G Ethernet applications and IEEE802.3aq specification covered. Provides transceiver contains SR (wavelength: 850mm), LR (wavelength: 1310mm) and LRM (wavelength: 1310mm) three configurations, ideal for corporate networks and transmission applications. Each transceiver is equipped with a duplex LC fiber optic interface for fiber optic connections, and all are in line with a small form factor transceiver standard SFF-8431, SFF-8432 and SFF-8472. To complement the product offering, FCI also offers SFP + connectors and cover plates and matching fiber LC.Universal 10Gigabit & STM64 SR SFP+ Transceivers - 300m MM 850nm, with Monitoring (DDM / DOM), Standard MSA Multimode Transceiver for 10Gigabit Ethernet, STM64 and 8Gigabit Fibre Channel with LC connector.OptoSpan SFP+ Transceivers ; OptoSpan SFP+ transceiver modules for bi-directional serial optical data communications such as 10GBASE-SR and 10GBASE-SW with distances up to 40km. The SFP+ 20-pin connector allows for hot plug capability. Digital diagnostic functions are available via an I2C. These SFP-H10GB-​CU1M – Compatible Cisco SFP+ cable, SFP+ DAC Twinax cable 1 Meter are designed for multi-mode and single mode fiber and operate at nominal wavelengths of 850- 1610nm (CWDM).

OM2 Duplex popular 50/125 multimode fiber

Our range of fibre patch leads are constructed from high quality connectors and  50/125 OM2 Duplex grade cable.Each lead has a short strain relief boot and is supplied with a test report detailing insertion loss.All of the patch leads come with an LSOH orange sheath and are individually bagged and labelled.Cost-effective solution that provides higher bandwidth and transmission rates and supports longer distances with lower loss than OM2 Duplex fiber. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The patented injection molding process provides each connection greater SC to ST, Multimode OM2 50/125μm, Duplex durability in resisting pulls, strains and impacts from cabling installs.Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 50/125 multimode fiber, immune to electrical interference.

SFP+ Cables and are backed by minimum 2-year

Now available in both SFP+ passive copper and SFP+ active copper configurations; providing an affordable low-power alternative to optical SFP+ Cables. OEM compatibility guaranteed. The single channel SFP+ interface offers a far more compact profile than X2 and XFP and is fully scalable to 10-Gigabit data rates.SFP+ Cables (Direct Attach) Now On Sale [20% OFF] -- Amphenol 10-Gigabit Ethernet SFP+ Direct Attach Copper Cables are available in lengths up to 12m everyday. Now available in both SFP+ passive copper and SFP+ active copper configurations; providing an affordable low-power alternative to optical SFP+ Cables.SFP+ Cables (Small Form-factor Pluggable) are a dependable choice for linking telecom and data communications equipment, such as routers and switches, in Gigabit Ethernet and Fibre Channel applications.All of our MSA-compliant Direct Attach SFP cables feature high quality twinaxial wiring and durable SFP connectors that provide dependable network connections, and are backed by minimum 2-year warranty and free lifetime technical support.

SFP+ transceivers are compliant with Small Form Factor standards

SFP+ transceivers and SFP+ direct attach cables can be hot-swapped while the switch is powered on. For a SFP+ Transceivers, you should always disconnect the fiber optic cable before removing a module.SFP+ based optical transceivers are all fully compliant to 10 G Ethernet based applications covered under IEEE 802.3 ae and IEEE802.3 Aq specifications. Transceivers are offered in SR (850 nm wavelength), LR (1310 nm wavelength) and LRW (1310 nm wavelength) configurations and are ideally suited for network and enterprise transmission applications. Each transceiver has a duplex LC optical interface for the optical cable connection and all transceivers are compliant with Small Form Factor standards SFF-8431, SFF-8432, and SFF-8472. Operating case temperature range is 0°C to 70°C. All transceiver products are fully RoHs 6/6 compliant.

The Panduit 10Gig SFP+ Passive DAC Cable Assemblies

The Small Form Factor committee approved and published SFF-8431 in July of 2009, with Panduit as a member and a signee. The document covers host ports, optical transceivers, and copper cables. Appendix E specifies direct attach copper cable assemblies.  These passive cable assemblies offer a low power, low latency, low cost option for a 10Gig interconnect. They may be plugged into SFF-8431 SFP+ Passive DAC compliant ports and are interchangeable with fiber optic transceivers.

QSFP+ AOC Cable their 40-Gigabit/s rated switch

QSFP+ to 4x SFP+ Splitter Cable offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers. For typical applications, users can install this splitter cable between an available QSFP port on their 40-Gigabit/s rated switch and feed up to four upstream 10GbE-SFP+ enabled switches.Optech manufacture Fiber optics transceivers SFP GBIC Mini-GBIC XFP SFP+ Fiber Channel Copper SFP-TX 10/100/1000Base-T X2-10GB-LR Xenpak-10GB-LR XFP-SR XFP-LR CWDM DOMBWDM MUX/DEMUX 155M 1.25G/bps 2.5G 8G FC SONET SDH OC-3 OC-48 OC-192 DWDM 3G CPRI Triplexes Media converter 10/100 Media converter Gigabit Ethernet Media converter Industrial Media converter SFP Direct Attach Cable QSFP Direct Attach Cable CXP Direct Attach Cable Fiber Optic patch cord 1470nm 1490nm 1610nm TAP HD/SD/SDI SFP converter CX4 OM3 DMI DVI Converter Rack 10G SFP 1X9 Duplex simplex SC LC ST patch cord MPO SNMP management BIDI SFP 1310/1490nm CX4 cable MINI SAS Cable QSFP+ to 4x SFP+ Splitter Cable, XFP Cable, QSFP+ AOC Cable, CXP Cable, SFP+ AOC Cable ,QSFP+ Cable ,Active Cable ,DAC Cable, SFP+ ,QSFP AOC Loopback .